Schimmelpilzentfernung,Schimmelpilz,schimmelpilzentfernung,schimmelpilzentfernung,special-clean.com

Procedure when fungus has been detected
If there is reason to believe that fungus is present,
the following should be considered:

_Analysis of the fungus, in order to check the extent
_of the contamination.
_Determine the cause - the cause of the mold has
_to be determined before any work is started.
_Planning the renovation - the planning is needed to
_inform the customer of the _procedure and the cost
_and to take the needs and wishes of the customer into _
_consideration.
_Dynamic microbiological indoor cleaning program

Often, another real problem with mold contamination occurs when fungus is removed
following conventional methods (e.g. wiping, scrubbing, grinding, sandblasting etc.).
While conventional methods concentrate on the removal of the visible contamination,
they do not take into consideration that spores and contaminated particles are freed
into the air. These airborne particles can have an adverse effect on health.

For years, we have proven the contamination of the air through microbiological indoor
air quality measurements. This knowledge, combined with our concern for the health
of our customers, has inspired us to develop a dynamic, microbiological indoor
cleaning program. This special cleaning program conforms to the procedures
recommended by the German department of environmental affairs, the standards of
the regional department of health in Baden-Württemberg, the TRGS, TRBA and VDI.

These standards are described as follows:
_spore-, dust-, and pollution-free surface removing from 1mm to 3mm, if
_contamination is visible,
_surface cleaning to remove all sedimentary spores,
_air cleaning in order to filter the air borne spores from the air

Summary of work offer

We determine the cause of the contamination.We offer cost-effective and poison free
removal of mold and/or chemicals including contaminated materials such as wallpaper,
wood, stucco etc. in a single process with the aid of our special safety milling machine
in connection with our highly efficient vacuum and filtration equipment. During the
process of removal, the contamination of the air and the surface is greatly reduced. In
over 80 % of our work cases, it is not necessary to replace the formerly contaminated
surfaces. This saves our customers time and money. We use our dynamic interior
cleaning program, which means that our poison free procedure adapts to the kind and
amount of pollution and the contaminated surface (e.g. walls, floors, ceilings, and
furnishings). We protect the air you breathe by using our high efficiency vacuum
cleaners equipped with the HEPA-air filter and BlowerDoor filtration system.We
remove paint, stucco, glue and other materials virtually dust free.We disinfect and
clean all equipment before every application.Our capacities are also suited for large
projects such as apartment buildings, hotels, VIP-estates, industrial buildings, schools,
day care centers, hospitals ….
We check and clean all kinds of vent systems and air-conditioning systems poison free
in accordance with regulations.

Below are the explanation regarding the graphic
- use of security milling machines with powerful vacuum equipment;
- therefore, spore-, dust-, and poison-free removal of contaminated materials;

advantages
- effectively reduces pollutant in the air and on the surfaces during the
_removal process;
- expensive removal of contaminated materials is not necessary in 80 % of our cases;
- the usual expensive dust protection measures are not needed;
- ideal when renovating living space;